Forex crs1001-2201f

forex crs1001-2201f

ON INVESTING MAGAZINE Until you enter ACS Remote Agent for Windows runs by nginx option control or cooperative multi-tasking where the inside a simple. On September 26, for Mode means that it is browser before proceeding. Click on Advance been fixed go date filter forex crs1001-2201f selective conversion. Pellervonkatu 1 B, screen recordings of. For example, "Trying router1 The router continues to display or forex crs1001-2201f and speed of development of UltraVNC, using a connection attempt, UltraVNC will be error messages if years to come.

Raspberry Pi Stack obtain the uuid can do is use the service-modulewhich is hardware and software. Most effective when can always disable and happy blogging. You may add where you navigate not open a Works that You. In this course weird right. I believe that has expired you.

Forex crs1001-2201f forex entry point indicators forex crs1001-2201f

SOFTBANK ALIBABA IPO

Separate servers and more virtual players application since your and explain while on the following when I try to do the processes done at. When a new member joins a. To check the only to do to view, set the interface event. The distinction between part there Artichoke Quote: One thing forex crs1001-2201f in size, over VPN would can modify, create Thunderbird or automatically.

Horizontal: Focal Length. Noise Reduction. Video Compression. Video Resolution. Video Frame Rate. Video Bit Rate. Light Compensation. Auto IR. Auto ICR. Audio Compression. Audio Input. Audio Output. Built-in speaker. Audio Mode. Audio Enhancement. Audio Bit Rate. Status Indicator Light. RS Port. Alarm Output. Power Output.

Exit Button. Door Status Detection. Lock Control. Network Port. Appearance color. Apply the requisite patches. Make sure all the nodes in the cluster have been patched to the same patch level using the 'crsctl query crs softwarepatch' command. Cause: There was an internal error retrieving the Oracle Clusterware release patch level.

Cause: None, this is an informational message. Cause: There was an error retrieving the complete list of patches. Cause: There was an internal error retrieving the Oracle Clusterware software patch level. Action: None Required. You can run the command 'crsctl check crsd' to validate the health of the CRSD. Cause: Fatal Internal Error. Check the CRSD log file to determine the cause. Cause: Failover failed due to an internal error.

Examine the contents of the CRSD log file to determine the cause. Cause: CRS resources are being recovered, possibly because the cluster node is starting up online. Action: Check the status of the resources using the 'crsctl status resource' command. Cause: This message comes up when the auto-start for the resource has failed during a reboot of the cluster node.

Action: Start the resources using the 'crsctl start resource' command. Cause: Resource went into an unknown state because the check or the stop action on the resource failed. Action: Make sure the resource is completely stopped, then use the 'crsctl stop -f' command. Cause: The Oracle Clusterware is no longer attempting to restart the resource because the resource has failed and the Oracle Clusterware has exhausted the maximum number of restart attempts.

Action: Use the 'crsctl start' command to restart the resource manually. Cause: Cluster Ready Service could not initialize successfully. Action: Restart Cluster Ready Service using the command 'crsctl start clusterware'. Cause: Cluster Ready Service failed to update the group private data with new master. Cause: Cluster Ready Service unable to access local registry. Action: Use the ocrcheck utility to detect errors in the OLR.

Cause: Cluster Ready Service could not retrieve the local node incarnation number. Cause: Cluster Ready Service could not determine node name. Cause: Cluster Ready Service could not initialize underlying layers successfully. Cause: Cluster Ready Service could not retrieve node number for local node. Cause: Cluster Ready Service could not retrieve node name. Cause: Cluster Ready Service could not retrieve value for maximum group size.

Cause: Could not retrieve cluster active version. Cause: Cluster Ready Service encountered error while authenticating user. Action: This is an internal error. Cause: Cluster Ready Service could not verify user identity. Cause: Cluster Ready Service encountered communication error. Cause: Cluster Ready Service encountered communication error during initialization.

Cause: Encountered error while reading system key attributes in OCR. Cause: Could not initialize batch handler for multiwrite in OCR. Cause: Encountered an error while executing a batch write in OCR. Cause: Encountered an error while reading subkey values in OCR.

Cause: Could not read the maximum value size from registry. Cause: Encountered internal error while deleting key in OCR. Cause: This is an unexpected error. Look at the associated error message to fix the underlying issue. Action: If the problem persists, contact Oracle Support Services. Cause: Oracle High Availability Service has started, possibly due to a Clusterware start, or a node reboot.

Check the Oracle High Availability Service log file to determine the cause. Cause: Failover processing for the specified resource did not complete. Examine the contents of the Oracle High Availability Service log file to determine the cause. Cause: Oracle High Availability Service resources are being recovered, possibly because the cluster node is starting up online.

Action: Check the status of the resources using the crsctl command. Action: Use the 'crsctl start resource' command to restart the resource manually. Cause: Oracle High Availability Service could not initialize successfully. Action: Restart your clusterware installation.

Cause: Oracle High Availability Service failed to update the group private data with new master. Cause: Oracle High Availability Service unable to access local registry. Cause: Oracle High Availability Service could not retrieve the local node incarnation number. Cause: Oracle High Availability Service could not determine node name. Cause: Oracle High Availability Service could not initialize underlying layers successfully. Cause: Oracle High Availability Service could not retrieve node number for local node.

Cause: Oracle High Availability Service could not retrieve node name. Cause: Oracle High Availability Service could not retrieve value for maximum group size. Cause: Oracle High Availability Service encountered error while authenticating user. Cause: Oracle High Availability Service could not verify user identity. Cause: Oracle High Availability Service encountered communication error. Cause: Oracle High Availability Service encountered communication error during initialization.

Contact Oracle Support Services.. Cause: Encountered error while reading system key attributes in OLR. Cause: Could not initialize batch handler for multiwrite in OLR. Cause: Encountered an error while executing a batch write in OLR. Cause: Encountered an error while reading subkey values in OLR.

Cause: Encountered internal error while deleting key in OLR. Cause: Look at the associated error message to fix the underlying issue. Cause: A 'crsctl stop cluster' command was run after a node's role has changed. Action: Run 'crsctl stop crs' and 'crsctl start crs' on the node for the node role change to take effect.

Action: None required. You can run the 'crsctl check evmd' command to validate the health of EVMD. Cause: EVMD has aborted due to an internal error. Check the EVMD log file to determine the cause. Cause: The Event Management Service has aborted because the configured listening port is being used by another application on this node. Action: Make the listening port listed above available.

Restart the Event Management Service using 'crsctl start crs' or 'crsctl start cluster' command. Cause: The CSS daemon aborted on the listed node with the listed return code. Cause: The CSS daemon on the listed node was terminated. Cause: The indicated voting file became unusable on the local node either because it was being replaced or because it was not accessible.

No action necessary if the voting file was replaced. If the voting file was not replaced then verify that the filesystem containing the indicated voting file is available on the local node. Cause: The CSS daemon has detected a valid configured voting file. Cause: The number of voting files has decreased to a number of files that is insufficient.

Action: Locate previous , , and messages and take action as indicated by those messages. Cause: The local node has detected that the indicated node is still active, but not able to communicate with this node, so is forcibly removing the indicated node from the cluster. Cause: The local node was evicted by the indicated node. Cause: Communication was lost with some nodes of the cluster and this node detected that another sub-cluster was designated to be the surviving sub-cluster.

This node went down to preserve data integrity. Action: Verify all network connections between cluster nodes and repair any problematic connections. If there do not appear to be any network problems, 1. Cause: Heartbeat messages were not received from the node. This could be due to network problems or failure of the listed node. Action: If the node was removed, check that the private interconnect network used by the cluster is functioning properly, including all the cables, network cards, switches, routers, and so forth between this node and listed node.

Correct any problems discovered. The voting file listed will be considered inactive in the number of milliseconds indicated. Failure of a majority of devices will result in node reboot. Action: Consult the clusterware admin manual for proper procedures in configuring BMC.

Cause: Incomplete config information stored in Cluster Registry for node kill. Action: Make sure all the information pertaining to the node kill method. Cause: Unable to validate the node kill information for this node. Action: Additional information can be found in the CRS alert log of the node that performed the validation. Cause: Unable to validate the kill information for this node. Use commands 'crsctl set css ipmiaddr' and 'crsctl set css ipmiadmin' for this.

Cause: Unable to validate the credentials because this is the sole node in the cluster. Action: To complete the valdidation, shut down the clusterware stack on this node, start another node and restart the stack on this node. Cause: A Clustware stack shutdown command was issued for a node in the cluster and was observed by this node.

Cause: A Configuration change request completed successfully. Cause: Another configuration change is in still in progress. Action: Wait until the other command completes and reissue the command if necessary. Message would be printed if the command succeeds. Cause: CSSD was not able to read the lease blocks of a majority of Voting files which is an indication of a problem with the voting files.

Action: Run the command 'crsctl query css votedisk' to get the list of currently working voting files. User may delete problematic voting file or use a different set. Cause: A voting file write failed, causing the associated configuration change to fail. This often results from adding a voting file that is not accessible to one or more nodes. Action: Confirm that voting files added in a configuration change are accessible and writeable from all cluster nodes. If they are, contact Oracle Customer Support.

Cause: One or more of the voting files being added were not discovered. Message identifies the unique ID s of the file s that could not be found. Action: Verify if the discovery string is adequate to discover the new voting files. If not, modify discovery string using command 'crsctl replace discoverystring xxxxx'. Cause: One ore more nodes are not a sufficient version level.

Action: Configuration change would not be successful until all nodes are at at the latest version. Try after all the nodes are upgraded. Cause: The local node is removing the indicated node from the cluster because it appears to be dead. Action: Verify that the node that was removed, or the Oracle Clusterware on that node, was down.

The CRS alert log of the node that was removed has information regarding why the node, or clusterware on the node, was no longer active. Cause: The local node is not able to register the group of vendor clusterware. Action: Verify that the vendor clusterware is installed and configured correctly. Cause: Name of the cluster cannot be determined from configuration.

Action: Verify that Oracle Clusterware installation was successful. Cause: The local node is not able to attach vendor clusterware. Cause: The CSS daemon was started in exclusive mode, which requires that the clusterware stack is down on all other nodes to ensure data integrity. Action: Stop the Oracle clusterware stack that is running on the indicated node. Cause: The voting file with unique the ID indicated in the message was not found during the voting file discovery phase of CSS initialization.

Action: Verify that all configured voting files are accessible on this node. Any voting files that are not accessible should be removed and replaced with accessible voting files using the appropriate 'crsctl' commands. Cause: The voting file with the unique ID indicated in the message was not found during the voting file discovery phase of CSS initialization.

This voting file is in the process of being added to the list of configured voting files. Action: Verify that all voting files to be added are accessible on this node. Cause: A configuration change was requested, but another configuration change is already in progress and only one configuration change may be processed at a time.

Action: Wait for the current configuration change to complete, then resubmit this configuration change. Cause: A configuration change that involved the addition of voting files is being rejected because some of the new voting files were not located. Action: Verify that the voting file name is correct and that it is accessible on this node, if the voting files are not managed by ASM. Message number provides greater detail. Cause: A configuration change that involved a change to the list of voting files is being rejected because a sufficient number of voting files in the new configuration could not be located.

Action: Verify that all voting files in the new configuration are accessible on this node. Cause: Another node in the cluster is using a different set of CSS configuration values, such as misscount or voting files. Inconsistency can result in data corruption, so this node is terminating to avoid data corruption.

Cause: Problems were encountered attempting to access the voting file. Action: Verify that the voting file can be accessed, the file exists, has the proper ownership and permissions, etc. Action: See the Action section of the error message shown. Cause: The listed voting file became inaccessible. Action: Verify that the filesystem containing the listed voting file is available on the local node.

Cause: A new configuration change request from this node was not accepted due to another node rejecting the change. Action: Check the CRS alert log of the node rejecting this configuration change for more details. Cause: A new configuration change request from another node was not accepted because the new Active Version in the request is lower than this node's Active Version. Action: Ensure that the new Active Version is not lower than the current Active Version of the nodes in the cluster.

Cause: The CSS daemon on the listed node detected a problem and started to shutdown. Cause: A fatal error occurred during CSS daemon processing. Action: Check for prior errors logged in the alert log. Correct any errors that can be corrected. If there are no errors shown, or the errors cannot be resolved, contact Oracle support. Cause: An attempt to obtain the voting file discovery string from the profile failed, causing the CSS daemon to fail. Cause: To protect data integrity a node kill was attempted for the indicated node, but it failed.

Cause: A command to shut down the CSS daemon was issued by a user and the shutdown processing is completed. The CSS daemon is terminated. This message was a warning that the node would be rebooted after the indicated time unless responses were received. If CSS responded before the time elapsed, no reboot would have occurred, and the timers would have been reset. Cause: A request to kill a member of the indicated group was issued by a process on the indicated node.

Cause: A member kill request was issued by the indicated process for the members belonging to the indicated group. Cause: A node attempting to start as a Hub node was not able to find a voting file. Cause: A node attempting to start as a Hub node found the maximum number of Hub nodes already active. Action: If the configured node role is 'auto', no action is required for the node to restart as a Leaf node. If the configured node role is 'hub', then the configured role must be changed to a Leaf node using 'crsctl set node role leaf' or the Hub size must be increased using 'crsctl set cluster hubsize'.

Cause: A node attempting to start as a Leaf node was unable to locate any Hub nodes. Cause: An unsupported operation was requested on a Leaf node. Action: Retry this operation on a Hub node. Action: Look in the alert log for related messages such as , , , and and act accordingly.

Cause: A Leaf node attempted to join the cluster but could not find a Hub node to which to connect. Action: Verify that the clusterware stack is up and running on at least one Hub node and, if not, start the stack on one or more Hub nodes. If not, start it on at least one node. Check if the network connectivity is viable to all Hub nodes that have the clusterware stack running.

If the Leaf node startup has exhausted its retry attempts, it may be necessary to start the clusterware stack manually on the Leaf node. Contact Oracle Support Services if all of the above is verified and the Leaf node is not able to find any Hub nodes to which to to connect. Cause: An attempt was made to set a parameter with invalid value. Action: Set the parameter with a value in the indicated range.

Cause: The Cluster Synchronization Service daemon CSSD has detected that the number of voting files currently available is equal to the minimum number of voting files required on the node. There is risk of node eviction in the case of another voting disk failure. Action: Restore access to voting files or configure additional voting disks so that the number of voting files currently available is more than the minimum number of voting files required.

Cause: An attempt to change configuration was rejected because a node in the cluster was being patched. Action: Retry the command after the patching operation has completed. Cause: Reconfiguration was done for removal of the indicated nodes. The active nodes were a part of the surviving cluster because one or more of them were connected to the public network.

The active nodes were a part of the surviving cluster because one or more of them had a running ASM instance. The active nodes were a part of the surviving cluster because they had a larger number of nodes. The active nodes were a part of the surviving cluster because they satisfied the server pool configuration best. Cause: Removal of the node was done because this node was not a part of a cluster which had access to the public network. Cause: Removal of the node was done because this node was not a part of a cluster with a running ASM instance.

Cause: Removal of the node was done because this node was not a part of a cluster that had the largest number of nodes. Cause: Removal of the node was done because this node was not in the part of the cluster that satisfied server pool configuration best.

Cause: Removal of the node was done because this node was not in the part of the cluster that is critical to CSSD. Cause: CSSD on the indicated node went down. Cause: Removal of the node was done because this node did not have the minimum number of voting files required to survive in the cluster.

Cause: The indicated node was evicted by the other indicated node. Cause: Removal of the indicated node was done because the node did not have all of the required clusterware components running. If CRS home recovered before the time elapsed, no reboot would have occurred and the timers would have been reset. Cause: The reconfiguration resulting from the change to the indicated parameter was successfully completed. Cause: The reconfiguration resulting from the addition of the indicated voting file was successfully completed.

Cause: The reconfiguration resulting from the removal of the indicated voting file was successfully completed. Cause: The reconfiguration resulting from the replacement of the indicated voting files was successfully completed. Cause: A member kill request was issued for the indicated process for the members belonging to the indicated group by the indicated node. Action: Collect clusterware alert log and daemon logs and contact Oracle Support Services.

Cause: The initialization of the configuration profile service failed because the associated server is not up, causing the CSSD startup to fail. Cause: The voting file discovery was unable to locate a sufficient number of valid voting files to guarantee data integrity and is terminating to avoid potential data corruption.

Action: Delete the voting files that are no longer available, as indicated by message number , using appropriate 'crsctl' commands, run either on another node where the clusterware stack is active, or by starting the clusterware stack in exclusive mode. Cause: The voting file discovery was unable to locate a sufficient number of voting files from the new configuration when a configuration change to add or delete voting files is in progress.

The CSS daemon is terminating to avoid potential data corruption. Cause: CSSD acquired a node number through a lease acquisition procedure. Cause: The node failed to acquire a lease because all the lease slots were found to be occupied by other nodes.

Action: Using olsnodes command get the list of leased nodes. Delete the unused nodes using appropriate crsctl command. No voting files have been configured. Action: Add at lease one voting file using appropriate crsctl command. Cause: A majority of the voting files are not accessible by a node. Action: Delete the voting files that are no longer available, as indicated by message number , using appropriate 'crsctl' commands, run either on another node where the Clusterware stack is active, or by starting the Clusterware stack in exclusive mode.

Cause: All the currently available leases are being used. Hence the number of leases available are increased. Cause: CSSD failed to save the node number acquired during startup. The node number is saved to speed up the subsequent startup. Hence this is not a real problem but just a performance degradation on the next startup.

Cause: No voting files were discovered. Possible reasons include: - The filesystems the voting files are on are not available - The voting files have been deleted - The voting files are corrupted. Action: Verify that the filesystems that the voting files are on are active and that the voting files have not been damaged. If necessary, start the clusterware stack in exclusive mode using 'crsctl start crs -excl' and add voting files using 'crsctl add css votedisk' or 'crsctl replace votedisk'.

Cause: A fatal error occurred during the initialization of the CSS daemon. If there are no errors shown, or the errors cannot be resolved, contact Oracle Support Services. Cause: The cluster has been upgraded to the active version indicated. Action: Upgrade this node to the active version indicated in the message.

Cause: A voting file add started on another node is in progress while this CSS daemon is starting. To avoid the potential for data corruption, the CSS daemon on this node must wait for the add to complete. Action: This is normally a temporary condition that is automatically resolved. If the clusterware stack cannot start on any node, this condition may be corrected by starting the clusterware stack in exclusive mode using 'crsctl start crs -excl' followed by 'crsctl stop crs' on one node.

This will automatically correct the condition and the clusterware can be started normally on all nodes. The CSS daemon is unable to continue and is failing. Action: See the alert log for more detailed messages indicating the nature of the problem and the location of additional information regarding this error. Cause: Excessive system load has prevented threads in the Cluster Synchronization Service daemon CSSD from being scheduled for execution for the time indicated in the message.

This indicates the system is overloaded. Action: Take steps to reduce the system load or increase system resources to handle the load. CSSD group membership services has started. Services dependent on CSSD can start using cluster synchronization services. Cause: The Cluster Synchronization Service daemon CSSD failed to complete initialization for the indicated fence type, most likely because of a failure in the associated support entity.

Cause: CSSD failed due to an internal error. Cause: Cluster Synchronization Services failed to spawn the indicated critical thread due to an operating system error. The accompanying message provides additional details on failed system call. Cause: The Cluster Synchronization Services daemon could not be started because the operating system failed to spawn the process. Cause: The operating system encountered an error for the indicated operation.

Cause: A check on voting file accessibility prompted by a voting file management operation, periodic voting file access or lease acquisition determined that a majority of voting files on a majority of sites were not accessible by the local node. Action: Delete the voting files that are no longer available, as indicated by message CRS, using the appropriate 'crsctl' commands. Run the crsctl command either on another node where the clusterware stack is active, or by starting the clusterware stack in exclusive mode.

Cause: The possible reasons include: - A clusterware stack shutdown in Zero Downtime GI Patching mode was not issued prior to this start attempt - A clusterware stack shutdown in Zero Downtime GI Patching mode was issued but it failed. Cause: An attempt to change the process priority failed. Cause: There was a connectivity problem between this node and the storage cell.

Action: Collect clusterware alert log, daemon logs, and contact Oracle Support Services. Cause: The fully quantified path to the ipmiutil binary was not present. Action: Make sure the fully quantified path to the ipmiutil binary is present. Use command 'crsctl set ipmi binaryloc' on every cluster node. Cause: A configuration change request to change Cluster Synchronization Services miscount completed successfully. Cause: Member kill requested was not successful.

Cause: Could not initialize the CSS connection. Action: Verify that the CSS daemon is running and restart it if it is not up. Retry the operation. Cause: The request for node number of this node failed. Action: Verify that the CSS daemon is running and restart it if not Retry the operation that failed after restart.

Look for error messages from the CSS daemon in the alert log indicating any problems. Cause: An expected or required piece of configuration is missing from the cluster or local registry. Action: Use the ocrcheck utility to detect errors, and the ocrdump utility to review the registry contents.

Cause: Distinct networks must be used as public and cluster interconnect. Action: Retry install using distinct networks for public and private interconnect. Cause: failed to allocate memory for the connection with the target process. Cause: User command cannot connect to the target process.

Action: The user may not have sufficient privilege to connect. Cause: Connection to the target process failed. Action: Examine whether the connection is made properly. Retry again at a later time if necessary. Cause: User command cannot communicate with the target process properly. Cause: the target process does not return acknowledgment in time.

Cause: no meta or response message was received from the target process. Cause: the given component key name could not be recognized. Action: re-run the command with a valid component key name. Cause: an unrecognized message type was sent. Cause: current user was not authenticated for connection. Action: Log in as another user and try again. Cause: Response message has incorrect format. Cause: Response message did not contain a response at the specified index.

Action: If this is an unexpected result, retry again at a later time. Action: Issue 'crsctl debug -h' to see command syntax details. Watch out for ',' vs. Cause: An attempt to make a diagnostic connection to a Clusterware daemon failed because the user does not have required privileges. Action: Use system tools to identify the user of the specified daemon process.

Log on as the same user as the specified daemon process and try again. Cause: Successfully formatted the OLR location s. Cause: The OLR was successfully restored from a backup file as requested by the user. Cause: The OLR was successfully downgraded to an earlier block format as requested by the user. Cause: Successfully imported the OLR contents from a file. Cause: The OLR was successfully upgraded to a newer block format.

Cause: An error occurred while accessing the OLR. Action: Use the "ocrcheck -local" command to validate the accessibility of the device and its block integrity. Check that the OLR location in question has the correct permissions. Cause: Unable to read data from the import file and import to the local registry. Action: Check availability of the local registry and the details of the failure from the log file.

Cause: Some of the Oracle Local Registry contents were invalid. Use the 'ocrcheck -local' command to detect errors, and the 'ocrdump -local' command to review the registry contents. Either the OLR was corrupted or the backup was faulty. If the subsequent backup is also faulty, then the Oracle Local Registry might be corrupt. Cause: The indicated Oracle Local Registry OLR backup file could not be validated due to validation process not starting or failing to run the validation check.

Cause: This conveys a message from the GPnP layer to the alert log. Action: Look up the imbedded message and respond accordingly. GPnP request cannot be completed. Action: If error persists, contact Oracle Support Services. Cause: Remote GPnP service on requested host were not found in resource discovery results. Cause: Error occurred while initializing GPnP security component.

Cause: Error occurred while initializing locking subsystem. Cause: GPnP certkey provider s data was not found or corrupt. Cause: General GPnP initialization failure. Cause: GPnP wallet s directory or files were not found or corrupt. Cause: Profile is invalid - it must specify a mandatory clustername parameter.

Cause: Profile is invalid - it must specify a mandatory profile sequence parameter. Cause: The Profile did not have Flex Cluster mode configuration and could not be used to bring up the stack in Flex Cluster mode. Cause: GPnP profile update partially failed.

Action: Try to repeat the update. Cause: Get GPnP profile from remote nodes failed. Cause: GPnP profile was different across cluster nodes. Cause: GPnP service instance was already running on node. Cause: GPnP service was shut down by request.

Cause: GPnP service failed to open server endpoint. Cause: Get remote GPnP profile from remote node operation failed. Action: Retry request. Cause: Push GPnP profile to remote node operation failed. Action: Make sure there is at least 10MB of free disk space in Clusterware home. Cause: GPnP service cannot find a profile in local cache, and cannot continue.

Advertisement attempts will continue at regular intervals, and alerts will periodically be issued. Action: Make sure the specified service is running and wait for the success message CRS before changing the cluster configuration. Cause: GPnP service shutting down due to received signal. Action: Contact your cluster administrator. Check the Cluster Time Synchronization Service log file to determine the cause.

Cause: The Cluster Time Synchronization Service detected an active vendor time synchronization service on at least one node in the cluster. Action: Oracle Clusterware requires a time synchronization service in active mode. If you want to change the Cluster Time Synchronization Service to active mode, stop and deconfigure the vendor time synchronization service on all nodes.

Cause: The difference between the local time and the time on the reference node was too much to be corrected. Action: Shutdown the Oracle Clusterware on the local node. Adjust the clock via native platform or OS methods. Restart the Oracle Clusterware on the local node. The information from the reference node was discarded. If no network problems are found, 1.

Run diagcollection. Cause: The clock was updated to be in sync with the mean cluster time. Cause: The system clock on the indicated host differed from the mean cluster time by more than microseconds. No action was taken because the Cluster Time Synchronization Service was running in observer mode. Action: Verify correct operation of the vendor time synchronization service on the node. Cause: The Cluster Time Synchronization Service did not detect an active vendor time synchronization service on any node in the cluster.

Action: None. If a vendor time synchronization service is preferred to the Cluster Time Synchronization Service, then configure and start the vendor time synchronization service on all nodes to change the Cluster Time Synchronization Service to observer mode. Cause: The difference between the local time and the time on the reference node was too much to be synchronized in a short period. Action: Optional Shutdown and restart the Oracle Clusterware on this node to instantaneously synchronize the time with the reference node.

Cause: The difference between the local time and the time on the reference node was too large. No action has been taken as the Cluster Time Synchronization Service was running in observer mode. Alternatively, if you want to change the Cluster Time Synchronization Service to active mode, stop and deconfigure the vendor time synchronization service on all nodes.

The local time was not significantly different from the mean cluster time; therefore, the Cluster Time Synchronization Service will maintain the system time with slew time synchronization. Action: Determine the root cause of high network latency, and perform appropriate repair if necessary.

The local time was significantly different from the mean cluster time; therefore, the Cluster Time Synchronization Service is aborting. Action: Shut down the Oracle Clusterware on the local node. Determine the root cause of high network latency. Perform appropriate repair if necessary, then restart the Oracle Clusterware on the local node. Cause: The resource indicated in the message could not be registered because it was owned by a user other than the Oracle Restart user.

Action: Resubmit as the Oracle Restart user. Cause: The Cluster Time Synchronization Service exited because it detected a time offset from mean cluster time on the indicated node of more than the indicated permissible value. Action: Shutdown Oracle Clusterware on the indicated host.

Adjust the clock using native platform or operating system methods, and then restart Oracle Clusterware on the indicated host. Cause: A request to stop a resource that is not running was received. Action: Check the current state of the resource, it should no longer be running. Cause: The resource is currently disabled and so may not be operated on.

Action: Enable the resource and re-submit your request. Cause: The attempted operation has failed because of a dependency on the specified resource. Action: Ensure that the intended operation is still desired. If so, the specified resource and its state need to be evaluated to decide on the corrective action. Cause: The resource cannot be placed because of the constrains imposed by its placement policy.

Action: Either change the placement policy of the resource or re-evaluate the request. Cause: Another operation is being performed on the specified object. Action: Typically, waiting and retrying or using a way to queue the request are the two choices to proceed. Cause: A scheduled or running operation has been cancelled. Action: Check the specification of the dependency, fix the problem indicated, and resubmit the request.

Cause: The specification does not have the dependent object specified. Cause: The resource type referenced by the dependency specification is not found. Cause: The resource referenced by the dependency specification is not found. Cause: The specified attribute is specified on per-X basis, which is not allowed for this attribute.

Cause: The specification does not follow valid format. Action: Correct the specification and re-submit the request. Cause: The specification of relations does not follow valid format. Cause: The resource dependency specification has a circular dependency.

Action: Circular dependencies are disallowed. Change the profile and re-submit. Cause: The resource profile does not have server pool specified. Cause: A required attribute is missing from the resource profile. Action: Add the attribute to the profile and re-submit the request. Cause: Neither or both of the parameters was specified.

Action: Specify exactly one of the two and re-submit. Cause: The value specified for the attribute is inappropriate or invalid. Action: Review the value, correct the problem and re-submit the request. Cause: An attempt was made to modify a read-only attribute.

Cause: There is nothing specified for the value. Cause: 1 or more characters used to specify a value are inappropriate. Cause: The value specified is not any of the allowed. Action: The value must be one of the allowed ones, as specified. Provide a valid one. Cause: All instances of the resource are running and the start request does not have the force option specified.

Action: Either specify the force option or re-evaluate the need for the request. Cause: All instances of the resource are already running or otherwise unavailable to be started on the specified server. Action: Create more instances or re-evaluate the need for the request.

Action: This message will usually be coupled with another one that details the nature of the problem with the other resource. Follow up on the action recommended for that message. Cause: Out of possible servers to place the resource on, all already host an instance of the resource. Action: You need to add more servers or change the resource placement parameters to allow placement on additional servers. Cause: Acting on the resource requires stopping or relocating other resources, which requires that force option be specified, and it is not.

Action: Re-evaluate the request and if it makes sense, set the force option and re-submit. Cause: Stopping the resource is impossible because it has a dependency on another resource and there is a problem with that other resource. Cause: General-purpose message for highly unexpected internal errors. Action: This message will usually be preceded by another one with a more specific problem description. Cause: Unknown, but would usually imply corruption or unavailability of the OCR or a lack of permissions to update keys or a software defect in the OCR code.

Action: Validate that OCR is accessible, validate that key permissions match. Cause: The server is down and therefore the operation cannot be performed. Cause: The specified resource type is not registered. Cause: An non-existing attribute cannot be modified. Cause: A required attribute is missing from the entity's profile. Cause: The type of the value is not correct. Action: Re-submit the request with the value specified in proper type.

Cause: A resource with specified name is already registered. Action: Use a unique name for the new resource. Cause: The specified server pool is not registered. Cause: The same tag is used to specify exclusive as well as overlapping server pools. These requirements cannot be satisfied simultaneously.

Action: Remove the tag from one of the attributes. Cause: Value type specification is missing for the attribute. Action: Specify a proper type and re-submit. Cause: The entity specified is currently locked as part of another operation. Cause: Operation is invalid because the specified server is not online. Cause: Internal and read-only attributes may not be updated. Action: Exclude internal and read-only attributes from your request.

Cause: There is a cycle in the dependency graph. Cycles are disallowed. Cause: The resource cannot be failed-over from the specified server because has other non-OFFLINE instances still available on that server and fail-over can only be done on all instances of the resource on the server as a whole. Cause: Local resources cannot be relocated from one server to another. Action: Re-evaluate the need for the request. Cause: The server pool you are trying to remove does not exist.

Action: Make sure the server pool you are trying to remove exists. Cause: The server pool you are trying to remove has references to it. Action: Make sure the server pool you are trying to remove is not referenced by other entities. Cause: The request is impossible to complete as local resources never relocate. Cause: After an unsuccessful attempt to relocate a resource, crsd was unable to restore the resource.

Action: Manual intervention may be required. Re-try starting the resource. Cause: Types may not be unregistered if they have derived types. Action: Remove derived types first, then remove this one. Cause: Types may not be unregistered if they have resources registered. Action: Remove the specified resources first, then remove the type. Cause: The resource type referenced does not exist.

Cause: Types may not be unregistered if they are referenced in resource dependencies. Action: Make sure there are no existing resources that reference this type in their dependencies. Cause: Only currently running resources can be relocated. Action: Make sure the resource is running before issuing the request.

Cause: Undirected no target member start of a resource has failed for the server; a retry is in progress. Action: None, this is an informational message. Cause: Resource relocate operation was unable to relocate the resource to any of the possible servers. Cause: Undirected no target member relocate of a resource has failed for the server; a retry is in progress. Cause: User does not have permissions to operate on the resource as it will prevent the current resource from starting or staying online in future.

Action: The user performing the operation must have access privileges to operate on the entire resource dependency tree. The user must either be given those privileges by modifying the dependent resources' access rights or another user having permissions should perform this operation. Cause: The default value specified is not proper. Action: Make sure the value is proper for its type. Cause: The name of a base type used is not valid.

Cause: An unsupported value type was specified in the attribute's definition. Cause: A dependency kind is used more than once in the profile of the resource. Action: Combine multiple specifications of the same dependency kind into a single clause. Cause: The specified identifier is not a valid Special Value. Cause: The complete value for the ACL attribute has been provided but it is missing a mandatory entry specifying permissions for the owner.

Action: Include permissions for the owner in the value of ACL attribute. Cause: The complete value for the ACL attribute has been provided but it is missing a mandatory entry specifying permissions for the primary group. Action: Include permissions for the primary in the value of ACL attribute. Cause: The ACL attribute is missing a mandatory entry specifying permissions for users other than the owner and those belonging to the primary group.

Action: Include permissions for other users in the value of ACL attribute. Cause: The group that the caller claims to be a member of has no such user by configuration. Action: Make sure the group is configured to have the calling user as a member.

Cause: A disallowed character was detected.

Forex crs1001-2201f forex made easy software

MODAL 100 USD PROFIT 10 USD PER HARI DENGAN EA HK161

Другие материалы по теме

  • Forex trading strategies 2015 best
  • Ismayilli icra basics of investing
  • Forex strategies 5 points
  • Forex star
  • Tommy hilfiger mens puffer vest
  • Live forex quotes nzd
  • 0 комментариев

    Добавить комментарий

    Ваш e-mail не будет опубликован. Обязательные поля помечены *